Short answer
Repeated tripping usually means a protective device has detected a fault, leakage or an overloaded circuit. An RCD responds to current escaping its intended path; an MCB protects against overload and short circuit. You can make limited external checks, but never keep resetting a device or remove a consumer-unit cover.
First decide whether it is safe to investigate
If you smell burning, see smoke, hear crackling or find water near electrical equipment, stop. Keep people away and switch off at the main switch only if the consumer unit is dry, undamaged and safely accessible. Do not cross a wet floor or touch hot or damaged equipment to reach it. For fire or immediate danger, leave the property and call 999 from outside.
Without these warning signs, take a moment to establish what has stopped working. Is it one socket circuit, several rooms or the whole home? Look from a safe position at the labelled switches on the consumer unit. You may open its normal user-access flap, but never unscrew a cover, expose wiring or touch anything behind the front panel.
Use a battery torch rather than candles. Tell other occupants that the power may return unexpectedly, and turn off cooking appliances and other equipment that could restart dangerously. If someone depends on powered medical equipment, follow their clinical backup plan immediately rather than spending time investigating the circuit.
RCD, MCB and RCBO: what has actually tripped?
An RCD, or residual current device, compares current flowing out and returning. An imbalance can indicate leakage to earth through damaged insulation, moisture, an appliance or a person. It offers important additional shock protection, but cannot prevent every electric shock. A typical domestic RCD has a test button and may protect several circuits together.
An MCB, or miniature circuit breaker, protects circuit wiring against excessive current. An overload may occur when several powerful appliances run together. A short circuit can cause a much faster operation. A breaker marked B32, for example, is not permission to increase its rating: the cable, installation method and circuit design determine suitable protection.
An RCBO combines residual-current and overcurrent protection for an individual circuit. If one trips, the switch position alone may not reveal which function operated. Some devices have indicators, but these vary by manufacturer. Photograph the visible labels for the electrician if safe; do not assume that every switch with a test button protects the entire home.
A limited, safe check you can make yourself
Only attempt a simple check when there is no heat, damage, burning smell, water or shock incident, and you can confidently identify the normal user controls. Switch off and unplug accessible portable appliances on the affected circuit. Do not pull out fitted ovens, washing machines or other heavy equipment, and do not dismantle plugs or sockets to investigate.
With those appliances disconnected, follow the manufacturer’s normal reset instructions for one reset attempt. Some devices must first be moved fully to OFF. If the device will not stay on, trips again, or you are uncertain which switch is involved, leave the affected circuit off and contact a registered electrician. Do not repeatedly operate switches in the hope that a fault will disappear.
If power remains on, reconnect accessible appliances individually while remaining nearby. Stop at the first further trip and leave the suspect appliance unplugged. Do not try it in another socket or a neighbour’s home. A successful reset is not proof of safety, and this check cannot rule out fixed-wiring faults or faults that appear only when an appliance heats up.
Why trips happen at particular times
An oven element, kettle or immersion heater may leak current only when hot. A washing machine may trip during its heating stage rather than at the start. Note what was happening when the trip occurred and approximately how long the appliance had been running. These observations are useful; deliberately reproducing a fault repeatedly is not.
Rain-related trips can involve outside lights, garden sockets, pond equipment or damaged outdoor cables. Leave suspected outdoor equipment off and arrange inspection. Do not open wet fittings, dry equipment with a hairdryer or assume that a waterproof label guarantees the installation remains sound after years of weather and movement.
An RCD protecting several circuits can also operate because small leakage currents add together. The most recently connected appliance is not necessarily defective, and unplugging it does not establish the underlying cause. Neutral-to-earth faults and connections between circuits require proper testing. These are not faults a homeowner can diagnose safely with an inexpensive socket tester.
Overload is different from an earth-leakage fault
If a socket-circuit MCB trips while several heaters or cooking appliances are running, overload is one possibility. Reduce demand by stopping unnecessary appliances, but do not use extension leads to move the same load around the room. Several sockets may share one circuit, and a different room does not necessarily mean a different electrical supply.
A plug-in extension lead has its own limit regardless of how many outlets it provides. Never daisy-chain adaptors or use a higher-rated fuse as a workaround. High-power equipment should be connected as its manufacturer specifies, with suitable permanent circuits where required. Warm, discoloured or damaged plugs and sockets need attention even if nothing has tripped.
A short circuit or damaged cable can also operate an MCB. The sound or speed of the trip is not a reliable household diagnostic test. Never bridge a fuse, hold a breaker on, change its rating or replace protective equipment yourself. Protection is disconnecting the supply for a reason that needs identifying.
What professional fault-finding involves
An electrician will ask about the pattern, identify the affected protective device and safely isolate relevant parts of the installation. Testing may include insulation resistance, protective-conductor continuity, polarity and RCD operation. Appliance tests may be needed separately. This work distinguishes a fixed-wiring defect from a faulty appliance rather than simply replacing whichever switch has operated.
Intermittent faults sometimes need more than one visit or an agreed period of monitoring. Discuss the initial investigation charge, the time authorised and how additional work will be approved. Ask for a clear explanation of what was found, what remains isolated and whether further testing is recommended. A consumer-unit replacement is not automatically the answer to recurring trips.
Electrical Safety First advises having regularly tripping circuit breakers or repeatedly blowing fuses checked by a registered electrician. An EICR can assess the wider installation when its condition is uncertain, but tell the electrician about the immediate fault first. A general inspection and targeted fault-finding have different purposes and should not be confused.
South-east London houses, conversions and rented flats
In Victorian and Georgian houses around Blackheath, Greenwich and Lewisham, electrical alterations may have accumulated over many refurbishments. An outside socket, loft conversion or newer kitchen may be connected differently from what the labels suggest. Age alone does not prove a fault, but uncertain circuit records make professional identification particularly valuable.
Converted flats can have consumer units in cupboards or communal areas and meters elsewhere. Confirm that you are looking at your own consumer unit. Do not operate a neighbour’s switches, enter locked service cupboards or interfere with sealed supply equipment. Ask the managing agent about access where necessary, especially if a fault affects shared lighting or several homes.
Tenants should report repeated trips promptly to their landlord or managing agent, including the affected appliances and any danger signs. A supplied appliance may require a different repair contractor from the fixed wiring. Do not wait for a routine inspection date when there is a new fault, and do not accept repeated resetting as a repair.
Keeping useful records and arranging the repair
Write down the date, weather, affected rooms, appliance use and which labelled device operated. Keep photographs limited to safely visible controls or damage; there is no need to remove anything. Tell the electrician about recent leaks, drilling, building work or appliance changes, including work that initially appeared unrelated.
If the whole street is without electricity and no protective device appears to have operated, the issue may be the network rather than your circuits. UK Power Networks explains that calling 105 connects you to the local electricity network operator. Contact your energy supplier for billing, credit or meter problems, rather than treating every outage as a wiring fault.
David J Farrar & Associates, trading as Electricians Blackheath, can discuss fault diagnosis across Blackheath, Bexley and nearby south-east London areas. David gives free fixed quotes for defined work; investigation scope should be agreed before attendance. Published working hours are Monday to Friday 7am–6pm and Saturday 8am–2pm, not a promise of round-the-clock emergency cover.
When to call a registered electrician
- A device trips again after one safe reset with accessible appliances unplugged.
- There is heat, scorching, buzzing or a burning smell: stop using the equipment.
- You receive a shock or tingling sensation from an appliance or fitting.
- Tripping follows rain, a leak, drilling or recent electrical work.
- The circuit labels are unclear or you cannot safely identify the affected device.
David J Farrar & Associates are Part P, NAPIT and NICEIC registered with over 35 years' experience across Blackheath, Lewisham, Greenwich, Bexley and North Kent. Call 07977 519533 or send an enquiry for a free, fixed quotation.
Related services
- Repairs, Maintenance & Fault Diagnosis — Tracing trips, dead circuits, burning smells and flickering lights — and fixing them properly.
- Testing & Inspecting (EICR) — Electrical Installation Condition Reports for homeowners, buyers, landlords and businesses.
- Consumer Unit & Fuse Board Upgrades — Replacement consumer units and fuse boards, with electrical testing and certification.
Frequently asked questions
Can a faulty fridge trip the whole house?
Yes, if it shares an RCD with several circuits. Leave a suspected faulty appliance disconnected and seek advice about food storage rather than bypassing protection. The fault may also be elsewhere, so tell the electrician exactly when it happens.
Why does the RCD trip when everything is switched off?
Wall switches do not necessarily disconnect every conductor, and fixed appliances may still be connected. Neutral-to-earth faults can remain relevant. Leave diagnosis to an electrician instead of opening accessories or disconnecting wires.
Should I reset the breaker every time?
No. One cautious reset after safe external checks is the limit described here. Repeated trips need investigation, and any burning, moisture, damage or shock means you should not attempt a reset at all.
Does tripping mean I need a rewire?
Not necessarily. A damaged appliance, outside fitting or single cable fault may be repairable without extensive work. Testing establishes whether there is a local defect or wider deterioration before any rewire is proposed.
Official sources
Need this sorted? Get a free, fixed quote from a registered local electrician.
07977 519533Enquire onlineThis guide is general information about UK electrical regulations and good practice, and any prices are indicative only. For advice on your property, speak to a registered electrician.

