What does a consumer unit do?
The consumer unit distributes electricity to each circuit in your home and contains the devices that protect those circuits — circuit breakers against overload and short circuit, and RCDs that disconnect the supply quickly if current leaks to earth, for example through a person.
Signs you need an upgrade
- Rewireable fuses (wire held between two screws).
- No RCD protection, or only partial RCD coverage.
- A plastic unit installed in a location where the current regulations require a non-combustible enclosure.
- Signs of heat damage, or frequent nuisance tripping affecting the whole house.
- You're adding circuits — a shower, EV charger or extension.
RCDs, RCBOs and AFDDs
An RCD protects a group of circuits. An RCBO combines a circuit breaker and RCD for a single circuit, so one fault doesn't take out several circuits. Arc fault detection devices (AFDDs) detect dangerous arcing; BS 7671 now recommends them in certain situations. Your electrician will advise on the right combination.
Non-combustible enclosures
Since an amendment to the wiring regulations in 2016, consumer units in domestic premises should have an enclosure made of non-combustible material (typically steel) or be housed in a non-combustible cabinet.
What happens on the day
The power is off for several hours. The existing circuits are tested — an upgrade can reveal hidden faults that need fixing before the new unit can be energised. Replacing a consumer unit is notifiable under Part P, so you should receive an Electrical Installation Certificate and a Building Regulations compliance certificate.
This guide is general information about UK electrical regulations and good practice. For advice on your property, speak to a registered electrician.

