Skip to content
Electricians Blackheath – David J Farrar & Associates

Guide · 8 min read

Electrical emergency checklist: what to do first

Know what to do about smoke, shocks, power cuts and dangerous electrics, when to call 999 or 105, and who handles supply faults in south-east London.

Short answer

For fire, serious injury or immediate danger, move to safety and call 999. Do not touch exposed wiring, wet electrical equipment or someone who may still be in contact with electricity. For a power cut, call 105 to reach the local network operator; internal wiring faults need an electrician, while meter and account issues generally start with your energy supplier.

First minute: protect people, not equipment

Stop what you are doing and keep other people away from the affected area. Smoke, flames, a strong burning smell, arcing or exposed live parts can escalate quickly. If there is fire or immediate danger, leave the property, close doors behind you if safe and call 999 from outside. Do not delay leaving to save possessions.

Only turn off the main switch if it is clearly safe to approach a dry, undamaged consumer unit. Do not cross standing water, reach past smoke or touch equipment that is hot, sparking or visibly damaged. If the switch cannot be reached safely, leave it alone and tell the emergency responders where the equipment is.

Use a battery torch if you need light. Avoid candles, especially while moving around an unfamiliar dark space. Keep children and pets with you, and warn anyone entering the property. Turning off electricity can stop lights, alarms, heating and access equipment, so explain any special risks to those attending.

Electric shock: do not become a second casualty

Do not touch a person who may still be in contact with a live electrical source. If you can disconnect the supply safely using a normal accessible switch, do so; otherwise keep clear and call 999. Never use a metal object, water or improvised tool to move a live cable or separate someone from it.

Once the electrical danger has been removed and it is safe to approach, follow the emergency call handler’s instructions. If the person is unresponsive and not breathing normally, the handler can guide CPR and use of an available defibrillator. Do not approach high-voltage equipment or fallen overhead lines even if they appear inactive.

An electric shock can cause hidden injury as well as visible burns. Seek medical advice even if the person initially feels well; call 999 for serious symptoms, collapse, breathing difficulty or a severe injury. Stop using the suspected appliance or circuit until it has been assessed, and do not recreate the incident to demonstrate the fault.

Smoke, burning smells and water near electrics

Do not throw water on an electrical fire. Evacuation and calling 999 take priority over trying to fight it. Even when flames are not visible, persistent burning smells, crackling or smoke from a socket, fitting or consumer unit require urgent action. Keep away and disconnect only if doing so involves no exposure to the hazard.

A leak through a light fitting or water around sockets can make surfaces and equipment dangerous. Do not touch switches in the wet area or stand in water to isolate power. If safe isolation elsewhere is not possible, withdraw and get help. Stop the water at a safe accessible stopcock only if that does not take you near electrical danger.

After a leak or flood, do not restore electricity simply because visible surfaces have dried. Water can remain inside accessories, appliances and concealed wiring routes. Arrange assessment before reconnection. If network or meter equipment has been affected, describe this to 105 or the supplier as appropriate, rather than asking an electrician to disturb sealed equipment.

Power cut: when to call 105 and UK Power Networks

If the power has failed without danger signs, look from a safe place to see whether neighbouring homes or street lighting are affected. Check a mobile network connection rather than relying on home Wi-Fi. The absence of street lighting is only a clue, not a conclusive test of whether the fault is outside your property.

UK Power Networks explains that the free number 105 connects callers to their local electricity network operator. In London and much of the South East this is UK Power Networks. You can also use its power-cut information service for reported incidents. A power cut is usually a network matter rather than an issue for the company that sends your energy bill.

Call 105 for suspected network damage or a problem with incoming supply equipment, and report fallen cables, damaged service equipment or unusual supply behaviour. Keep well away from fallen lines and anything touching them. If someone is in immediate danger, call 999 as well. Never assume that a cable is safe because the power appears to be off.

Only one property being affected does not prove the fault is inside. An individual service cable or connection can fail. Conversely, normal street lighting does not prove your home has a healthy supply. Describe what you can safely observe and let the network operator or electrician establish the boundary.

Supplier, network operator or electrician?

Your energy supplier handles your account, payments and many meter enquiries, arranging a meter operator where needed. If a prepayment meter has run out of credit or displays an account-related message, use the supplier’s official contact route. Do not assume that buying credit will fix a burning smell, damaged meter or dangerous supply connection.

The network operator maintains the local distribution network and its supply equipment. Your electrician normally deals with your installation downstream of the relevant supply boundary, such as circuits, sockets, lighting and the consumer unit. Exact ownership around meters and isolators can vary, so professionals may need to coordinate rather than offer an instant answer from a photograph.

Never break seals, pull the service fuse or remove covers from meters or incoming supply equipment. These are not homeowner isolation methods. If several lights become unusually bright and dim or appliances behave abnormally together, contact 105 urgently for advice and stop using equipment where safe; a serious supply connection fault may need investigation.

Tripped switches: keep household checks limited

If there are no warning signs and your consumer unit is safely accessible, look at its visible labels and normal user controls. A tripped breaker or RCD may explain the loss of power. Do not unscrew the front, touch internal wiring or replace fuses with a higher rating. The switch position does not tell you that the installation is safe.

For a simple trip with no damage, moisture or shock incident, switch off and unplug accessible portable appliances on the affected circuit. One reset following the manufacturer’s instructions may be reasonable if you understand the controls. If it trips again or will not stay on, leave the circuit off and arrange electrical fault diagnosis.

Do not repeatedly reset protection to keep an appliance running. Do not connect suspect equipment to another circuit, bypass an RCD or run extension leads through wet rooms. Electrical Safety First recommends having regularly tripping breakers or repeatedly blowing fuses checked by a registered electrician. A temporary loss of convenience is safer than defeating protective equipment.

Prepare for a longer outage and communicate clearly

Keep fridge and freezer doors closed as much as practical, follow food-safety guidance and avoid guessing how long food remains safe. Switch off cooking equipment and appliances that could restart unexpectedly. Leave one ordinary light switched on if safe so you can tell when power returns, but do not leave potentially faulty equipment energised.

For medical equipment, use the established backup plan and contact the relevant clinical service. Call 999 if a loss of power creates an immediate medical emergency. Ask the supplier and network operator about Priority Services Register support if eligible, but do not treat registration as a guarantee of uninterrupted supply or immediate restoration.

Give callers or contractors your address, postcode, callback number and a brief description: smoke or no smoke, which rooms are affected, whether neighbours have power and any visible switch position. Mention water, medical needs, access limitations and whether you have isolated anything. Do not investigate further just to answer a question if doing so would be unsafe.

Local flats, repairs and the return to normal

In Blackheath, Greenwich and Lewisham conversions, your meter may be in a shared cupboard and communal lighting may have a separate supply. Contact the managing agent or freeholder where shared equipment or access is involved. Do not enter locked service rooms, operate another flat’s switches or assume every consumer unit belongs to your home.

Tenants should notify their landlord or emergency repairs contact promptly, but a fire, serious injury or dangerous network fault should go straight to the appropriate emergency service. Keep a record of who was informed and what was isolated. Before using the affected circuit again, obtain clear advice from the attending professional about what has been repaired or remains unsafe.

David J Farrar & Associates can discuss repairs and fault diagnosis during published hours: Monday to Friday 7am–6pm and Saturday 8am–2pm. David gives free fixed quotes for defined work; agree investigation terms separately. This is not a 24/7 emergency service promise. If urgent attendance is needed outside those hours, use an available registered electrician and confirm charges.

When to call a registered electrician

  • A breaker trips again after one safe reset or will not stay on.
  • Sockets, switches or fittings show scorching, crackling or heat.
  • Water has reached wiring, lighting or electrical accessories.
  • An appliance or fitting has given someone a shock.
  • You need confirmation that an isolated circuit is safe before reuse.

David J Farrar & Associates are Part P, NAPIT and NICEIC registered with over 35 years' experience across Blackheath, Lewisham, Greenwich, Bexley and North Kent. Call 07977 519533 or send an enquiry for a free, fixed quotation.

Related services

Frequently asked questions

Is 105 my electricity supplier?

No. It connects you to the local electricity network operator for power cuts and network problems. Your supplier deals with your energy account and usually starts the process for meter-related enquiries.

Should I call an electrician if the whole street is out?

Report the power cut to 105 or check the network operator’s official updates. An electrician cannot repair the street network. Internal danger signs still need the appropriate emergency response, even during a wider outage.

Can I switch the power back on after a leak dries?

Not simply because surfaces look dry. Moisture and damage can remain hidden inside fittings, cables or appliances. Have the affected installation assessed and follow professional advice about reconnection.

Does David offer a 24-hour call-out service?

No round-the-clock service is promised here. Published hours are Monday to Friday 7am–6pm and Saturday 8am–2pm. For immediate danger use 999, for network problems use 105, and arrange an available electrician for urgent internal faults.

Official sources

Need this sorted? Get a free, fixed quote from a registered local electrician.

07977 519533Enquire online

This guide is general information about UK electrical regulations and good practice, and any prices are indicative only. For advice on your property, speak to a registered electrician.

Talk to an electrician today

Free quotations · No hidden fees · Domestic & commercial

Call nowFree quote