Short answer
London electrician prices vary by the job, access, urgency and contractor. As a broad budgeting allowance, ordinary planned work might be around £50–£100 per hour or £300–£600 per day for one electrician, before VAT where applicable. These are indicative ranges, not a tariff or a quote from David; request a written price for your property.
Use ranges for planning, not as a promised price
Hourly and day rates are useful starting points, but there is no universal London electrician tariff. The broad allowances above are illustrative budgeting guidance, not an independently surveyed average. Some contractors and specialist jobs fall outside them. Emergency attendance, difficult fault-finding, commercial requirements or a two-person team can cost appreciably more.
Check whether a quoted figure is labour only. Materials, parking, congestion or emissions charges, specialist access equipment and certification arrangements may be included, separately itemised or excluded. An apparently low hourly figure does not tell you the final cost until you know the minimum booking and the likely scope.
David gives free fixed quotes for defined work. This guide does not publish his hourly rate or guarantee a particular day price. A proper quotation considers the installation and the requested outcome, rather than applying a generic online figure to every home.
Hourly charging, minimum attendance and day rates
An hourly arrangement can suit uncertain work, especially diagnosis where the fault is not yet known. Ask when chargeable time starts, the minimum attendance charge and how later time is rounded. A first-hour charge may be higher than subsequent hours because it includes travel or initial administration. Confirm this before booking.
A day rate should specify how many working hours it covers and whether one electrician or a team will attend. It may not equal eight times an hourly rate. Travel, collecting materials, breaks and site restrictions can be treated differently between businesses, so compare the actual terms rather than assuming a standard working day.
If several small repairs are needed, prepare one list and ask whether a combined visit is sensible. Access to all work areas and advance agreement about materials can reduce avoidable delays. Do not assume that an electrician can safely add unplanned work without checking circuit capacity, testing requirements and the time available.
When a fixed quote is more helpful
A fixed quote works best when the required work can be defined: for example, specified additional sockets with an agreed cable route and making-good responsibilities. Ask for the number and type of accessories, their positions, the proposed finish and the included testing. Photographs may help, but some installations need a site visit.
A quote and an estimate are not the same thing. An estimate is an informed forecast and may change as the scope becomes clearer. A fixed quote should set out its assumptions, exclusions and validity period. Ask how unexpected defects or customer-requested changes will be priced and approved before extra work begins.
Keep the scope realistic. If an old circuit proves unsuitable for extension, making it safe may require a revised proposal. A clear variation process protects both sides: the electrician explains the finding, gives the options and cost implications, and obtains approval rather than quietly running up an open-ended bill.
What makes a job cost more or less
Access is often decisive. Running a cable beneath accessible floorboards differs from lifting finished flooring, opening tiled walls or working above a high stairwell. Occupied rooms, delicate finishes and restricted working hours can increase labour. Tell the electrician about parking, pets, furniture and any limits on lifting floors or interrupting power.
Specification also matters. Decorative accessories, smart controls, specialist lighting and higher-performance equipment can have different material and commissioning costs. A cheap fitting may take longer to install or be harder to maintain. Compare equivalent products, warranties and controls rather than treating all sockets, lights or consumer units as interchangeable.
The existing installation affects what can safely be added. Earthing, bonding, protective devices and circuit condition may need assessment before alteration. A quote that includes necessary testing and clearly explains remedial work can represent better value than one that assumes everything is suitable without checking. Age alone is not a reason to sell a rewire.
VAT, materials and the total you will actually pay
GOV.UK states that the standard VAT rate is 20%. Ordinary domestic electrical repairs and installations supplied by a VAT-registered business will commonly attract the standard rate, although particular projects can have different treatment. Ask the contractor which rate applies and request the total including VAT, rather than calculating from an ambiguous headline figure.
For a simple illustration, £80 of labour excluding VAT becomes £96 at 20%, before any other items. A business that is not VAT registered should not add VAT. Do not infer David’s VAT status from this example: confirm the tax treatment on your own written quote and invoice.
Materials may include more than visible fittings: cable, containment, connectors, fixings and protective equipment all contribute. If you want to supply your own accessories, agree this first. The electrician needs suitable compliant products and may not accept responsibility for the product warranty, missing parts or delays caused by incompatible customer-supplied equipment.
Fault-finding and urgent attendance need clear limits
An intermittent fault cannot always be priced like a known replacement socket. Agree an initial investigation allowance, the reporting point and what happens if the cause remains unresolved. Ask whether the charge covers diagnosis only, a minor repair if possible, or a separate return visit with parts. There should be no uncertainty about permission for further time.
Out-of-hours attendance may carry a higher minimum or premium. Ask for the charge before agreeing to a visit, but never delay evacuation or a 999 call because you are comparing prices. A network power cut should be reported to the network operator via 105, not automatically treated as a private electrician call-out.
David’s published hours are Monday to Friday 7am–6pm and Saturday 8am–2pm. These are not a promise of a 24-hour emergency response. If you need immediate help outside them, use an appropriately available provider, confirm its charges and registration, and follow emergency advice while awaiting attendance.
South-east London homes: compare the same scope
A Victorian terrace in Blackheath, a converted flat in Lewisham and a newer home in Bexley can present very different access arrangements. Original cornices, finished floors, loft rooms and shared meter cupboards may change the practical route for work. Explain the property type and any recent alterations when requesting a quote.
For flats, establish who can authorise access to communal areas and whether the managing agent requires advance notice, documentation or restricted working hours. Work inside your home does not automatically permit altering shared equipment. Delays caused by missing permissions can affect price and scheduling, so resolve access before the appointment.
Listed buildings and sensitive historic interiors may need additional discussion about consent and cable routes. Electrical safety work and heritage requirements should be coordinated rather than assumed to cancel each other out. Ask for clear making-good exclusions, especially where specialist plasterwork, flooring or decoration must be handled by others.
A practical way to compare and accept quotes
Send each contractor the same written brief and photographs where useful. State your priorities, preferred accessory finish, access constraints and whether decoration is planned. Ask each to identify included testing, certification, waste removal, making good and any building-control notification. Comparing different scopes on price alone is misleading.
Check the electrician’s current registration through the relevant competent-person scheme rather than relying only on a logo. GOV.UK’s Approved Document P explains the England building-control framework for domestic electrical work. Where work is notifiable, establish who will arrange notification and what documentation you will receive; testing and notification are separate parts of the process.
Before acceptance, confirm the total, payment stages, start arrangements and variation procedure in writing. Keep the quote, invoice, product information and certificates together. A professionally scoped price gives you a safer basis for a decision than choosing solely by the lowest hourly number, especially where the existing installation has not been assessed.
When to call a registered electrician
- You need a property-specific fixed quote rather than a broad allowance.
- Repeated trips or flickering need diagnosis before repair pricing.
- A proposed addition may require a new circuit or protection upgrade.
- Different quotes include unclear exclusions or certification arrangements.
- Shared access, historic finishes or previous alterations complicate the work.
David J Farrar & Associates are Part P, NAPIT and NICEIC registered with over 35 years' experience across Blackheath, Lewisham, Greenwich, Bexley and North Kent. Call 07977 519533 or send an enquiry for a free, fixed quotation.
Related services
- Repairs, Maintenance & Fault Diagnosis — Tracing trips, dead circuits, burning smells and flickering lights — and fixing them properly.
- Additional Sockets — More sockets where you need them — fewer extension leads, less overloading.
- Testing & Inspecting (EICR) — Electrical Installation Condition Reports for homeowners, buyers, landlords and businesses.
Frequently asked questions
Are materials included in a day rate?
Not necessarily. A day rate often describes labour, but businesses package work differently. Ask for the included materials, attendance hours, team size and any additional charges before comparing it with a fixed quote.
Does a free quote mean free fault-finding?
No. Preparing a price for defined work is different from investigating an unknown electrical fault. David gives free fixed quotes, but diagnostic attendance and any testing should have an agreed scope and charge before booking.
Is the cheapest hourly rate best value?
Not automatically. Minimum charges, productivity, access, materials and the quality of testing all affect the outcome. Compare the whole written scope and the final payable price, not just the hourly headline.
Should I pay VAT on electrical work?
A VAT-registered contractor will commonly charge standard-rate VAT on ordinary domestic electrical work. Some situations differ, so ask for the applicable treatment and an inclusive total. A non-registered business cannot add VAT.
Official sources
Need this sorted? Get a free, fixed quote from a registered local electrician.
07977 519533Enquire onlineThis guide is general information about UK electrical regulations and good practice, and any prices are indicative only. For advice on your property, speak to a registered electrician.

