Skip to content
Electricians Blackheath – David J Farrar & Associates

Guide · 8 min read

Electrical certificates explained: which document do you need?

Understand EIC, Minor Works, EICR and Building Regulations certificates, what each covers, and which documents to keep for your home.

Short answer

An Electrical Installation Certificate records new installation work; a Minor Works certificate covers suitable smaller alterations to an existing circuit. An EICR assesses the condition of existing wiring, while a Building Regulations compliance certificate records notification of applicable work. These documents have different purposes and are not interchangeable.

The four documents at a glance

Start with the question you need the paperwork to answer. Was a new circuit installed correctly? Has an existing circuit been altered and tested? Is older wiring satisfactory for continued use? Was notifiable domestic electrical work dealt with through Building Regulations? Each question calls for a different document, and a single project can legitimately produce more than one.

A full rewire normally produces an Electrical Installation Certificate, often shortened to EIC, plus Building Regulations evidence. Adding a socket to a suitable existing circuit may produce a Minor Electrical Installation Works Certificate. Inspecting a flat before purchase produces an Electrical Installation Condition Report, or EICR. Calling all three an electrical safety certificate is common, but it can cause confusion when ordering work.

Electrical Safety First explains periodic inspection as an assessment of an existing installation. Approved Document P explains the separate Building Regulations framework for domestic electrical work in England. Ask for the precise document names in your quotation so that a conveyancer, managing agent or tenant can understand what was supplied.

Electrical Installation Certificate: new work

An EIC is used for a new installation, new circuits and work such as replacing a consumer unit. It records the extent of the work, the people responsible for design, construction and inspection and testing, and the relevant schedules. It is not simply a receipt confirming that an electrician attended your property.

Read the description of the installation covered. A certificate for one new shower circuit does not certify every older circuit in the house. A consumer unit replacement involves checking the suitability of the existing installation for connection, but it does not mean that every concealed cable has been replaced. The stated scope is therefore essential when comparing documents.

Expect the address, contractor details, signatures or electronic authentication, dates and test results to be completed. Keep the complete document, including continuation sheets. If a builder arranged the electrician, request the electrical certificate directly as part of project handover rather than assuming the builder’s invoice provides equivalent evidence.

Minor Works certificates: small does not mean untested

The full name is Minor Electrical Installation Works Certificate. It is appropriate for qualifying additions or alterations to an existing circuit where no new circuit is provided. Examples can include adding a lighting point or a socket to an existing circuit, provided the circuit and protective arrangements are suitable for the change.

The electrician still needs to inspect and test the relevant work and establish that the alteration has not impaired safety. The certificate identifies the circuit, describes the alteration and records relevant protective measures and test results. A small job can reveal inadequate earthing, a missing protective conductor or damaged wiring that must be addressed before proceeding.

A Minor Works certificate is not the right substitute for an EIC when installing a new circuit. Equally, not every like-for-like maintenance task requires exactly the same certificate. Agree what documentation is appropriate before work starts, and retain the invoice and job description alongside any electrical certification supplied.

EICR: a condition report, not an installation certificate

An EICR assesses the condition of an existing installation at the time of inspection, within its recorded extent and limitations. It normally includes observations, inspection schedules and test results. It does not certify who installed the wiring originally, retrospectively notify building work or guarantee that nothing can go wrong afterwards.

C1 means danger is present and immediate action is required. C2 means potentially dangerous and calls for urgent remedial action. FI means further investigation is required without delay. C3 is an improvement recommendation. A report containing C1, C2 or FI observations is normally unsatisfactory; C3 alone does not make it unsatisfactory.

Read the limitations as carefully as the overall outcome. An inaccessible outbuilding or an excluded circuit may matter to your decision. After remedial work, retain the original report and the written confirmation or certificates identifying what was corrected. An old unsatisfactory report should not be quietly discarded simply because a contractor has subsequently visited.

Building Regulations compliance: a separate process

Approved Document P sets out England’s domestic electrical safety guidance. Since the 2013 changes, notifiable work includes installing a new circuit, replacing a consumer unit and certain additions or alterations in special locations. The exact location and work matter; a kitchen is not automatically a special location merely because it contains a sink.

A suitably registered competent person can normally self-certify work within their scheme scope and arrange notification. The homeowner then receives a Building Regulations compliance certificate through the scheme process. Alternatively, the relevant building control route must be arranged. Do not assume an electrician can simply sign off somebody else’s completed work afterwards.

The installation certificate records technical inspection and testing; the compliance certificate records the Building Regulations route. Keep both where applicable. Non-notifiable work must still be safe and meet the relevant requirements. These are England-focused distinctions: Wales has different notification rules, and Scotland uses a different building standards system.

Checking paperwork before you file it away

Check the property address, date and description against the work actually commissioned. Confirm that all numbered pages and schedules are present and legible. A certificate referring to a neighbouring flat, an earlier consumer unit or a different circuit should be queried promptly. Administrative mistakes are easier to resolve while the job is fresh.

Ask the contractor to explain unfamiliar entries rather than trying to assess individual test values without the installation context. Look for declared departures, limitations and any recommendation for further inspection. If Building Regulations evidence is expected separately, ask who will arrange it and when to follow up if it has not arrived.

Store an electronic copy somewhere you can access after changing computers or email accounts. Use filenames that include the address, work and date. Keep invoices, circuit charts and equipment manuals with the certificates. Give a future electrician the complete pack before alterations; it can improve planning even though fresh checks will still be necessary.

Missing certificates in south-east London homes

In Victorian terraces around Blackheath and Lewisham, one house may contain wiring from several renovations. Georgian conversions in Greenwich can have separate flat consumer units and shared entrance lighting. A folder labelled house electrics may therefore contain documents for only one flat or one historic extension rather than the whole building.

Begin with the original contractor, the relevant registration scheme and, where appropriate, the building control record. They may be able to supply duplicates or confirm a notification. Establish what work was done and approximately when before concluding that every missing document represents a breach. Older installations do not all have a modern certification history.

An electrician can inspect present condition through an EICR, but cannot recreate an original installer’s declaration without the appropriate basis. If a sale is involved, ask your conveyancer how missing regulatory evidence should be handled. A fresh condition report may reassure a buyer about safety while leaving the historic paperwork question unresolved.

What to request when booking electrical work

Describe the project accurately: a new circuit, additional sockets, a consumer unit change or an inspection of existing wiring. Ask whether the quotation includes inspection, testing, certification, notification where applicable and remedial work. A cheap inspection price may not include repairs, while an installation quote should make its handover responsibilities clear.

Provide previous reports and mention any known alterations, recurring tripping, water damage or inaccessible areas. For flats, establish who controls shared equipment and who can authorise access. If the property is rented, explain the tenancy position because statutory report-sharing and remedial duties may apply in addition to the technical work.

David J Farrar & Associates provides free fixed quotes for agreed work across Blackheath, Bexley and surrounding south-east London areas. The useful starting point is the actual installation and the document you need, not a generic request for a certificate. Arrange any necessary access and paperwork early, particularly before a tenancy starts or a property transaction reaches exchange.

When to call a registered electrician

  • You are installing a new circuit or replacing a consumer unit and need the correct certification and notification route.
  • A report lists C1, C2 or FI observations, or the extent of an inspection is unclear.
  • Certificates describe different work, a different flat or an installation that no longer matches the property.
  • You need an assessment of existing wiring because original installation documents cannot be found.
  • A builder has completed electrical work without providing the promised handover documents.

David J Farrar & Associates are Part P, NAPIT and NICEIC registered with over 35 years' experience across Blackheath, Lewisham, Greenwich, Bexley and North Kent. Call 07977 519533 or send an enquiry for a free, fixed quotation.

Related services

Frequently asked questions

Is an EICR the same as a Part P certificate?

No. An EICR reports on present condition. A Building Regulations compliance certificate records the notification route for applicable work. An EICR cannot retrospectively provide the original Building Regulations notification.

Does an EIC expire after five years?

An EIC records completed work at a particular date rather than renewing itself or simply expiring. Future inspection requirements depend on use, condition, recommendations and applicable legislation. A rental inspection deadline is a separate issue.

Do I need a certificate for an extra socket?

An addition to an existing circuit will commonly be documented with a Minor Works certificate where appropriate. A new circuit requires an EIC. Notification depends on the actual work and location, not simply the number of sockets.

Can another electrician replace my missing original certificate?

They may obtain a duplicate if authorised records exist, or inspect the current installation. They cannot truthfully claim responsibility for another person’s original design and installation just to fill a gap in your paperwork.

Should I give a buyer every electrical document?

Give your conveyancer the complete relevant pack, including reports and evidence of repairs. Explain what each document covers and disclose known issues accurately rather than selecting only pages that make the installation appear satisfactory.

Official sources

Need this sorted? Get a free, fixed quote from a registered local electrician.

07977 519533Enquire online

This guide is general information about UK electrical regulations and good practice, and any prices are indicative only. For advice on your property, speak to a registered electrician.

Talk to an electrician today

Free quotations · No hidden fees · Domestic & commercial

Call nowFree quote